Oil and Gas Course Thrissur

Oil and Gas Course Thrissur the Oil and Gas Courses the need in the field of Engineers and technicians in the Oil and Gas, Petroleum Industries has risen to an unprecedented level like never before. Businesses have realized that the aging workforce of Piping, Pipeline, Instrumentation, and Automation is now the main factor in bringing into the next generation of highly skilled technicians and engineers within the Oil and Gas industry.

SMEC has been an ISO 9001:2015-certified multinational company that was established in 2001. Oil and Gas Course Thrissur, Kerala SMEC has evolved into an industry leader with more than twenty years experience within the maritime and oil and Gas industries. Candidates can all avail certifications recognized from National Skill Development Corporation (NSDC), India International Skill Centre (IISC), TUV Rheinland Germany, etc. upon successful completion of the training. SMEC is approved by on the successful completion of training by American Society for Nondestructive Testing (ASNT), American Welding Society (AWS), American Petroleum Institute (API). Oil and Gas Course Thrissur, Kerala

Oil and Gas Course Thrissur

Syllabus for Oil and Gas Course

  • Introduction
  • Terms and Definitions
  • Welding Positions
  • Factors affecting the welding process
  • Welding Symbols – AWS A2.4/BS-ISO
  • Defectology – Welding, Casting, Forming, Fracture
  • Mechanism(Ductile/Brittle/Fatigue)
  • Introduction to the welding process and its parameters
  • Fusion ARC Welding process shielded metal ARC welding(SMAW/MMA)
  • Tungsten Inert Gas welding(TIG/GTAW)Gas Metal ARC Welding (GMAW)-MIG/MAG/FCAW
  • Submerged ARC welding thermal welding and cutting process
  • Welding Metallurgy
  • Materials – Types/composition/structure and properties
  • Alloys – Alloys and their characteristics
  • Steel and its Alloys
  • Weldability
  • Defects affecting the weldability of steel
  • Destructive testing of materials and welds
  • Heat treatments
  • stress and Distortions
  • Calibration, Safety and Weld repair
  • QC documentation – WPS/PQR/WQT/ITP
  • Types of Boilers
  • Boiler and pressure vessel inspection
  • Pressure parts
  • What is NDT?
  • Need of NDT
  • Different NDT Methods
  • Roles of NDT Level I,II and III Inspectors
  • Codes and Standards
  • Acceptance, Rejectance
  • Criteria
  • Defectology
  • NDT Method Selections
  • Visual Testing
  • Penetrant Test(PT)
    Basic Principles
    Steps of PT
    Types of Penetrants
    Types of Cleaning
    Developer Types
    Post Cleaning Methods
    Dwell time of Penetrants and Developers
    Flourescent Methods
    Blacklight and Whitelight
    Indication Development, Interpretation and Evaluation
    Sensitivity rank of Developers and Penetrants
    Brief of ASME Section V Article 6
    Practicals(Visible and Fluorescent Methods) and Report Samples
  • Magnetic Particle Testing(MT)
    Method Selection
    Basics of Magnetism
    Types of Magnetic Fields
    Types of Magnetization
    Dry and Wet Methods
    Wet, Visible and Fluorescent Methods
    Magnetic Particles Concentration and Conditions
    Field Indicators, Pi Gauge,
    Slotted Strips
    Light Measurements
    Hysteresis Loop
    Introduction to ASME
    Section V
    Interpretation, Evaluation and Sample Reports
  • Ultrasonic Testing(UT)
    Basics of Sound
    Basic Principle of UT
    Working Principle
    Working Principle
    Design and Construction of Probes
    Types of Transducers
    Calibration Methods(V1 block, V2 block, and DAC blocks)
    Inspection Methods and Calibration
    Data Presentation
    Practicals(Calibration of Normal, Angle Probe and Inspection of Test Pieces)
  • Radiographic Testing and Film Interpretation(RT & RTFI)
    Basics of RT
    Review of RT variables
    Difference between X-Ray and Gamma-Ray Devices
    Intensity, Penetration, and Material Thickness
    Source Selection for Gamma-Ray Technique
    Radiographic Techniques, SFD, Exposure Time
    Exposure Time Calculations, Film Factor, RHM
    RT Film Types, Variables, Handling, Screens, Speed, Density, Exposure, and Equivalent Film Classes
    Penetrameter – Types, Selection, and Placement
    Film Viewing – Illuminator, Film ID, Location Marker, Densitometer
    RT Image Quality – Sensitivity, Contrast, Definition, Unsharpness, Backscattering
    Film Processing
    Course, Procedures, and Written Practices
    RT Safety Aspects, Measuring Devices, Exposure Limits, and Protection
    Review of Radiographs below RT Report format
  • Introduction to Oil and Gas
  • Introduction to Project
  • Drilling
  • Oil Exploration
  • Oil Refining
  • Basic Piping
  • Process equipment
  • Code and standards
  • Pipe fittings & Components
  • Abbreviation and Symbols
  • Piping isometric drawings
  • Metric and imperial units
  • Trigonometry
  • Cut length calculation
  • Bill of Materials
  • GAD Introduction
  • Cut a length of GAD
  • Equipment layout drawing
  • P & ID and Symbols
  • Pipe supports
  • PPE’s
  • PTW
  • H2S
  • Introduction to EPC in mechanical field
  • Introduction to Industrial Engineering
  • Engineering Drawings
  • Engineering Projects
  • Operational Planning
  • Production Planning
  • Scheduling and Roster
  • Mobilization and Demobilization
  • Procurement Engineering
  • Material Management
  • Production and Construction
  • Inspection and Quality analysis
  • Commissioning
  • PPM
  • Documentation
  • Practice of Implementation
  • Mechanical structure applications
  • Static structures
  • Applications
  • Escalators
  • Elevators
  • Marine vessels & hulls
  • Boilers & pressure vessels
  • Coach works & carriages
  • Structural elements
  • Columns
  • Beams
  • Plates
  • Arches
  • Shells
  • Catenaries
  • Need of EPC Engineering
  • Various types of structural engineering
  • Beam(s-shaped, l shaped(angle))
  • Bearing pile(h-shaped)
  • Channel shaped(c-shaped)
  • Hollow steel shaped (has)
  • I – beam
  • Pipe
  • Tee
  • Custom shaped
  • Trusses
  • Types of trusses & their applications

Natural gas processing
Shale gas
Natural gas liquids
Natural gas composition and specification
Natural gas processing
“The reason why” a brief history of the use of oil and gas.

The generation of oil and gas prospects
Basic geology and rock properties.
Basic seismology
Procuring the right to drill – “the mineral lease” 
Regulatory permits
Basic drilling operations
The rig and rig site 
Drilling fluid
Wellbore architecture
Well control  
Deviated wells 
Open hole
Evaluation using well logs Cores
Fluid tests
Basic completions   Open hole
Slotted liner or gravel pack   Cased and perforated   Multiple completions  Tubing and packers   Perforations
Near well bore damage   Well stimulation 
Basic production operations
Reservoir mapping – how much is there?
Recovery mechanisms basic economics flow from the reservoir
Well testing 
Artificial lift
Improved oil recovery methods  
Water flooding 
CO2 flooding
Chemical flooding
Oil and gas transportation 
Tankers and LNG
Closing a project – plug and abandonment and site restoration

Introduction to Petroleum Refining and Crude Oil Composition
An Overview of Refinery Products and Processes
Chemical Constitution of Crude Oil
Properties and clasiification of crude oil
Pour point
Concentration on Various Contaminants
Distillation and Boilling point
Cruse Assay
Elemental analysis and ternary classification of crude oils
Over all Refinary Flow
Desalting and Distillation
Light end units
Catalytic reformer
Catalytic Hydro treat ment
Conversion of heavy gas oil
Conversion and processing of vaccum gas oil
Processing and conversion of vaccum distilation residue
Paths of upgrading heavy oil
Sepration Process A
Atmoshpheric and Vaccum Distillation unit
Distillation Methods
Distillation Terminology
Sepration Process B
Fractionation on Light End Units ( LEU)
Gradient Solubility Model
Deasphalting Process
 Thermal Conversion Process
Chemistry of Thermal Cracking
Thermal Reactivity consideration in process
Catalytic Conversion process 1
Chemistry of Catalytic Cracking
Catalytic cracking process
Catalytic hydrocracking
Catalytic Conversion process 2
Catalytic reforming
Chemistry of catalytic reforming
Finishing Process Hydrogenation
HydrodemetallationHydrotreatment Process
Product Blending
Supporting Process
Gas processing unit
Sulfur recovery
Hydrogen Production
Watewater treatment
Environmental regulation of refinary

Fire safety
Fire triangle
Classification of fire
Extinguishment of fire
Fire extinguisher
Fire hydrant system
Fire sprinkler
Modes of fire transfer
Fire drill

Drafting settings & drawing tools
Modification tools
2d draftings
Isometric projections
Properties panel, layers
Mechanical drawings
Annotation panel
Block editing
Advanced tools
Tools palettes
Plot and print

Project Planning Management Concept
Creating OBS
Creating EPS
Creating WBS
Calander Creation
Activities and Project Codes
Resourse Creation
Resourse Allocation
Resource Analysis & Leveling
Baseline Creation
Baseline Assigning
Earned Value Calculation
Updating Project Progress
Tracking Project Progress
Import & Export Project

Project Planning Management Concept
Creating OBS
Creating EPS
Creating WBS
Calander Creation
Activities and Project Codes
Resourse Creation
Resourse Allocation
Resource Analysis & Leveling
Baseline Creation
Baseline Assigning
Earned Value Calculation
Updating Project Progress
Tracking Project Progress
Import & Export Project

Shareable Certificate

International & National Level Certification.

Online Oil and Gas Courses

Start instantly and learn at your own schedule, Oil and Gas Courses, Quick to become a professional.

Classroom Oil and Gas Courses

Get Oil and Gas Courses in Classroom at limited locations. Kochi, Chennai, Trivandrum, Mumbai, Calicut, Bangalore, Mangalore, Vizag, Dubai, Saudi Arabia, Qatar, Oman, Kuwait, Nigeria.

Practical only subscription

Subscription for remote lab connectivity. 24x7

Flexible Schedule

Set and maintain flexible deadlines.

Oil and Gas Course Thrissur, Kerala

What is Oil and Gas Courses?

Explore the world of Oil and Gas Course Thrissur, Kerala

Join us to build a sturdy career in the field. Learn from the best and become even better.

Oil and Gas Course Thrissur, the field of Oil and Gas has been growing non-stop since it’s discovery. It shows no signs of stopping in the near future. The aging workforce of oil and gas professionals call for new minds. Get certified in oil and gas and build a robust high paying career.

Oil and Gas Course Thrissur, Kerala Best Oil and Gas training centre in Thrissur Oil and Gas training include QA QC NDT training and course fee starts from ₹5000. Eligibility plus two BE Diploma Graduates ME Ongoing and Passout, Special training for experienced and working employees

A course in oil and gas is the most suitable option to find a job within the gas and oil industry. It is the Oil and Gas Industry are one of the biggest industries in India or around the globe. Oil and gas is an industry where the economy of a nation can have significant impact. It is among the most rapidly growing sectors in a nation such as Oil and Gas Course Thrissur, Kerala India.

Oil and Gas Courses

Get ready to work in Oil and Gas piping and QC Engineering

Oil and Gas Course Thrissur, Kerala SMEC is an ISO 9001:2015 Certified multinational company founded in 2001. SMEC has grown to become an industry leader with over 20 years of experience in marine and Oil and gas Industrial sector. Training is available in Cochin, Trivandrum (Kerala), Chennai (Tamil Nadu), Mangalore (Karnataka), Visakhapatnam (Andhra Pradesh), Mumbai, Thane (Maharashtra), Sharjah, Dubai (UAE). All candidates can avail Certification accredited by National Skill Development Corporation (NSDC), India International Skill Centre (IISC), TUV Rheinland Germany etc.

On the successful completion of training. SMEC is authorized by the American Society for Non-destructive Testing (ASNT), American Welding Society (AWS), American Petroleum Institute (API). The demand for Engineers and technicians in Oil and Gas, Petroleum Industries has increased to a soaring high like never before. Companies have discovered that the aging workforce in Piping, Pipeline, Instrumentation and automation has become the paramount factor for bring in the next tier of oil and gas sector talented technicians and Engineers at Oil and Gas Course Thrissur.

To Know More About Oil and Gas Course Thrissur

Oil and Gas training in Thrissur | Oil and Gas course in Thrissur, Kerala

Programming Languages and Tools Covered

Trending Add-ons Courses



Oil and Gas Course Thrissur the SMEClabs Institute’s Diploma in Oil and Gas Engineering Course is for students who are looking to find work in this field. This course provides managerial and technical skills required to be employed for the petroleum and natural gas industry. When you go through the subjects in this class, you’ll be amazed at the depth of knowledge that is offered. Anyone an education degree equivalent to a +2 or undergraduates are able to find an employment in this field by taking this course. Oil and Gas Course Thrissur, Kerala

Best Oil and Gas Course Thrissur Kerala | No1 training Course
Oil and Gas training in Thrissur | Oil and Gas course in Thrissur, Kerala

Trending Oil and Gas Course Thrissur. Learn from highly qualified classes with no cost EMI. 100% placement assistance, offline & online classes available SMEC.

Course Provider: Organization

Course Provider Name: SMEClabs

Course Provider URL: https://www.smeclabs.com/oil-and-gas-course-thrissur-kerala-city/

Editor's Rating: