MEP Course

WHY LEARN MEP Course? MEP Course When we walk through a commercial building we never get to see live naked Electrical wirings hanging out, pipelines going up and down inside the building and even the ventilation is designed into the structure that it looks like a piece of art. There are structures where it is visible in rare cases where it becomes a part of the aesthetics of interior design itself. There are many reasons to this. Just like the strength of a building’s structure, there are equal importance for a proper Ventilation (heat management & air circulation), Electrical System (from power grid to various outputs) and Plumbing (that includes water supply & sewage disposal) which adds up to MEP (Mechanical, Electrical & Plumbing). This is because as any wrong move can cost lot of money and even life itself at times. MEP designs are made at the time of structural design itself, so as to get the government’s approval for construction if they are satisfy various public health norms. MEP also includes the design of firefighting systems installed. MEP designs play a huge role in the life and safety of a building. SMEClabs offers you a detailed training in MEP, walking you through global standards.

mep course

International Standards Corporate Training

MEP Course Syllabus

Design & Drafting of HVAC Systems

  • Introduction to Building construction (Civil & MEP Services)
  • Introduction to Heating Ventilation and Air conditioning
  • Basics of Heat Transfer:
  • Standards and codes used in HVAC
  • Study on Psychometric Charts (Manual and software analysis).
  • Study on Refrigerants: Types of Refrigeration cycles and its Components.
  • Types of Air Conditioning systems:
  • Types of Fans & its Application, Fan Laws
  • Types of Pumps, Pump Laws, Pump in series and parallel.
  • Cooling & Heating Load Calculation:
  • Study on Air Distribution systems
  • Duct Designing methods
  • Pipe Sizing methods:
  • Air Balancing system and Pressurization of Space.
  • District Cooling System
  • Cooling Tower Selection, Evaporation losses, Drift losses calculation,
  • Pump Head Calculation
  • Coil Selection
  • ESP Calculation
  • Variable Refrigerant Volume (VRV) System Designing
  • Dehumidifier Selection (silica gel & Desiccant DH)
  • HRW-Heat Recovery System (Rotor Wheel, Heat Pipe, Run around Coil &
  • Plate Heat Exchanger)
  • Estimation and Costing
  • Cold rooms
  • Stair Well Pressurization System

Autodesk Revit MEP

  • Linking projects
  • View templates
  • General system options
  • Use building elements for energy analysis mode
  • Preparing spaces
  • Zones in the system browser
  • Use third party tool for checking
  • Heating and cooling load calculation
  • Adding mechanical equipment
  • Adding diffuser
  • Create duct system
  • Adding duct by duct layout
  • Adding duct by duct pace holder
  • Adding duct manually
  • Duct sizing
  • Annotating duct
  • Model pipe system
  • Adding light fixtures
  • Adding receptacles
  • Adding & circuiting panel board
  • Creating panel schedule
  • Creating a switch system
  • Circuiting receptacles
  • Adding wiring
  • Modifying panel schedule
  • Creating lighting circuit as per Indian standard
  • Fire Sprinkler System
  • General setting
  • Adding voltage definition
  • Creating distribution system
  • Creating electrical family and creating circuit
  • Creating mechanical family
  • Model sanitary system
  • Model domestic water system
  • Interface detection with coordination drawing
  • Creating construction documents
  • Duplicating plan views
  • Annotations and dimensions
  • Detailing

Revit MEP Course

Online MEP course

Start instantly and learn at your own schedule, Building Management System Course, Quick to become a professional.

MEP Course Duration and Fees

Get MEP Course training in Classroom at limited locations. Kochi, Alappuzha, Idukki, Kannur, Kasaragod, Kozhikode, Palakkad, Wayanad, Kollam, Kottayam, Malappuram, Ernakulam, Pathanamthitta, Thiruvalla, Thrissur, Chennai, Trivandrum, Mumbai, Calicut, Bangalore, Mangalore, Vizag, Dubai, Saudi Arabia, Qatar, Oman, Kuwait, Nigeria.

MEP Testing and Commissioning Program

Chiller VRV Ductable Split Testing and Commissioning

Chiller VRV Ductable Split Testing and Commissioning

Electrical Systems

  • Introduction
  • Fundamentals
  • Rules & regulations.
  • Wiring and cable management systems
  • Lighting distribution system
  • Power distribution system
  • DB schedule
  • Switch gears-types and selection.
  • UPS & Inverters.
  • Earthing & lightning protection system
  • Transformers and generators
  • Electrical system design
  • Maintenance
  • Safety standards
  • Electrical system Drafting (CAD)
  • Project planning and estimation.
  • Quantity estimation

Plumbing Systems

  • Introduction to building construction
    (Civil & MEP services)
  • Introduction to plumbing system
  • Common sanitary fixture details
  • Formula for flow through pipes
  • Drainage system
  • Cold water system
  • Gray water system
  • Hot water system
  • Irrigation system
  • Drainage system
  • Storm water system
Reference standards & codes: NBC, NSPC, NPC, IPC & ASPE standards

Fire Fighting Systems

  • Introduction to Fire protection Systems
  • Classification of fire
  • Hazard Classification
  • Active and Passive Fire Protection Systems.
  • Fire Strategy Plan
  • Stair Well Pressurization System.
  • Fire Water Sump Sizing, Over Head Tank Sizing.
  • Fire Sprinkler systems– Types, (Wet pipe, Dry pipe, Pre-Action, Deluge, Anti-Freeze,
  • Combined Dry Pipe and Pre-Action System.) Selection, Designing, Pipe Sizing.
  • Fire Stand Pipe System, Fire Hose Cabinets & Fire Hydrants Selection.
  • Fire Fighting Hydraulic Calculation, Head Loss & Pump Head Calculations
  • High Rise Buildings. Zone Control Valve.
  • Fire Water Pump – [Main Pump, Jockey Pump, & Diesel Pump] Classification,
  • Types & Selection. Reference Standards: NFPA 10, 13, 14, 24, 20, 2001, 11 & 1, NBC & FSAI Codes for
  • Fire Fighting System Designing.
  • FM200 System Designing – Water less Fire Protection System] Capacity, Pipe Sizing,
  • Nozzle Selection. Heat Detector: Fixed Temperature, Rate of Rise, Linear
  • Heat Detection Cable.
  • Flame Detector.
  • Project Cost Estimation
  • Drafting
Reference standards: NFPA, NBC

Diploma in Revit

Course Code - SLM - 2006 | Difficulty - Beginner / No experience | Eligibility - Any Degree, Diploma, Graduates | Mode - Online / Offline / OnDemand / Hybrid | Duration - 90 Hours
Detailed Syllabus | Enroll Now

Diploma in MEP Designing & Drafting

Course Code - SLM - 2004 | Difficulty - Beginner / No experience | Eligibility - Any Degree, Diploma, Graduates | Mode - Online / Offline / OnDemand / Hybrid | Duration - 90 Hours
Detailed Syllabus | Enroll Now

Post Graduate Diploma in MEP

Course Code - SLM - 2007 | Difficulty - Beginner / No experience | Eligibility - Any Degree, Diploma, Graduates | Mode - Online / Offline / OnDemand / Hybrid | Duration - 180 Hours
Detailed Syllabus | Enroll Now

Diploma in Electrical System Design

Course Code - SLM - 2002 | Difficulty - Beginner / No experience | Eligibility - Any Degree, Diploma, Graduates | Mode - Online / Offline / OnDemand / Hybrid | Duration - 45 Hours
Detailed Syllabus | Enroll Now

Diploma in Public Health Engineering

Course Code - SLM - 2005 | Difficulty - Beginner / No experience | Eligibility - Any Degree, Diploma, Graduates | Mode - Online / Offline / OnDemand / Hybrid | Duration - 45 Hours
Detailed Syllabus | Enroll Now

Diploma in HVAC Design & Drafting

Course Code - SLM - 2003 | Difficulty - Beginner / No experience | Eligibility - Any Degree, Diploma, Graduates | Mode - Online / Offline / OnDemand / Hybrid | Duration - 45 Hours
Detailed Syllabus | Enroll Now

Diploma in Fire Fighting

Course Code - SLM - 2008 | Difficulty - Beginner / No experience | Eligibility - Any Degree, Diploma, Graduates | Mode - Online / Offline / OnDemand / Hybrid | Duration - 45 Hours
Detailed Syllabus | Enroll Now

AutoCAD 2D & 3D

Course Code - SLM - 2001 | Difficulty - Beginner / No experience | Eligibility - Any Degree, Diploma, Graduates | Mode - Online / Offline / OnDemand / Hybrid | Duration - 45 Hours
Detailed Syllabus | Enroll Now

Job Opportunities

The Benefits of MEP Engineering

Essentially, anyone who is responsible for or involved in the construction of a building is in need with a candidate for using MEP engineering.

Who Is This Program For?

Whom Should Attend?

Candidates Interested to build a career in Construction or Engineering Industry through Building their Skillset in MEP, having either ITI, Any Graduation or HSE as Basic Qualification could enrol for this Training & Certification Program.

A course from SMEClabs having International Certification Value will truly Project you towards this goal and help each an every individual to attain the best output they can.

Programming Languages and Tools Covered

This course is aimed at students who are interested to build a career in MEP Field. Training Provides In-depth knowledge in Mechanical, electrical, Plumbing & fire system Designing & drafting Technology. We SMEClabs have all the accreditation from Government skill development programs and other international certifications. Best MEP Training courses provided by SMEClabs are: HVAC Designing & Drafting training, Electrical System Design training, Public Health Engineering training, Autocad training, FirefightingSystem training, REVIT MEP training, REVIT Architecture training.

We provide this Integrated Automation Training in the following locations:

Thiruvananthapuram, Calicut, Kottayam, Cochin, Chennai, Coimbatore, Nagarcoil, Mangalore, Bangalore, Vishakapatnam, Hyderabad, Mumbai, Thane, Delhi, Sharjah, Abu Dhabi, Dubai, Fujairah, Singapore.

MEP Course

FAQ - Frequently Asked Questions

The inspection, testing, and certification of Mechanical, electrical, and plumbing (MEP) systems refer to the processes that ensure a building’s MEP infrastructure is operating efficiently. … MEP certification also provides confirmation of quality.

Learn courses related to MEP and make that course as a path to your career.

Best MEP Training courses provided by SMEClabs with 100% placement Assistance are :

  • HVAC Designing & Drafting Training Course
  • Electrical System Design Training Course
  • Public Health Engineering Training Course
  • Autocad Training Course
  • Firefighting System Training Course
  • REVIT MEP Training Course
  • REVIT Architecture Training Course

MEP stands for “Mechanical, electrical, and plumbing.” … They assist with decision making, cost estimation, construction administration, documentation, building management, and building maintenance.

Some field included in MEP are HVAC Designing & Drafting, Electrical System Design, Public, Health Engineering, Autocad, Firefighting System, REVIT MEP, REVIT Architecture

Learn MEP from the best mep training institute which is accreditation to Government skill development programs like NDSC, IISC.
We SMEClabs have all the accreditation from Government skill development programs and other international certifications. 
Best MEP Training courses provided by SMEClabs are :

  • HVAC Designing & Drafting 
  • Electrical System Design
  • Public, Health Engineering
  • Autocad, FirefightingSystem 
  • REVIT MEP
  • REVIT Architecture

Share Opportunities with your friends

Best MEP Course | No1 Training Centre | SMEClabs Since 2001
MEP Course

Best MEP Course. Explore your career with SMEClabs. Learn from highly qualified experts. 100% free job placement assistance with no cost EMI, flexible timing

Course Provider: Organization

Course Provider Name: SMEClabs

Course Provider URL: https://www.smeclabs.com/mep-course

Editor's Rating:
4.9